Motorcycle ABS

ABS 10 light is one-channel ABS for front brake specifically designed for smaller two-wheelers which are commonly utilized in emerging markets; the size has been reduced by up to 45% and weight by up to 30% compared to the previous generation of Bosch ABS unit.

Motorcycle ABS 10 base is a smaller and lighter two-channel ABS which is specifically designed for emerging markets.

This ABS is suitable for two-wheelers with hydraulic front and rear wheel brakes. It offers a full antilock protection, even in case of hard braking or on slippery roads.

ABS 9 with integrated pressure sensor

ABS 9 with integrated pressure sensor enables a more precise detection of vehicle dynamics and a finer control of the system reaction in case of instability. This ABS unit is suitable for mid-segment size vehicles.

ABS 10 enhanced has a pressure build-up function enabling to distribute an optimized brake force while braking front/rear or both, improving vehicle stability. The latest ABS unit for high-performance bikes achieves the 35% of box volume reduction as well as 20% of weight reduction, which brings broader options for installation to motorcycle. ABS 10 enhanced is particularly suitable for high-performance bikes.

ABS 9 enhanced with three-channel has a pressure build-up function enabling to distribute an optimized brake force while braking front/ read or both, improving vehicle stability. This ABS unit is applicable to three-wheeler vehicles and front double-disk two-wheelers.

The wheel-speed sensors detect the rotational speed of the wheels by using a non-contacting measurement principle, and transmit the sensor data to the ABS unit.